Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-41
00
BOTH CD:….........
DMT: 000000 000000 000000
(6) F4: Program the Leading Digit Table
Dial bin number xxx following BTN 1 to go to another bin
BOTH: Whenever pressing BTN 2, LCD will be changed
as
“BOTH
INT
COL
BOTH….”
CD : Dial the leading digits following BTN 3
DMT (dependent to day/time zone)
For Day zone 1 : Press BTN 4 and 6 digits
(6 digits : each pair(2 digits) means the index to the DMT for
the each time zone 1/2/3)
For Day zone 2 : Press BTN 5 and 6 digits
For Day zone 3 : Press BTN 6 and 6 digits
(The
[SPEED]
button is used to validate the remaining index)
Note:
1. The modified one may be stored into a different bin, since
ARIA ascending sort for the faster lookup.
2. To check another bin, then press [UP]/[DOWN] key or dial
that bin number following BTN 1.
3. About the index of DMT
(See the Table 2.7.1)
LCR DMT TABLE
ENTER BIN NUM (00-24)
(7) F5: Program Digit-Modification-Table (DMT)
Select the bin number
(If MEMU is installed, the range will be changed to '00-99')
00
A:….............
RP01 RN01 AP01 C01 ALT..
Dial xx following BTN 1 to go to another bin.
A (Added digit stream)
Dial the digit stream following BTN 2.
RP (Removal Position)
Dial xx following BTN 3.
RN (Removal Number of digits of code in each table)
Dial xx following BTN 4.
AP (Add Position)
Dial xx following BTN 5.
C (CO group)
Dial CO group xx following BTN 6.
ALT (Alternative DMT index)
Dial xx following BTN 7.
(See Table 2.7.1)
INITIALIZE LCR DB(1-4)
DMT COG ALT ALL
(8) F6: Initialize LCR database
BTN 1 for DMT
BTN 2 for COG
BTN 3 for ALT
BTN 4 for ALL
ENTER DMT INIT VAL (18)
000000 000000 000000
8.1) Change all DMT indexes in leading table with a new one.
BTN1 and 6 digits for the new DMT index of DAY_ZONE 1
BTN2 and 6 digits for the new DMT index of DAY_ZONE 2
BTN3 and 6 digits for the new DMT index of DAY_ZONE 3
All DMT indexes of leading-table are changed to a new one, if
pressing the
[HOLD/SAVE]
button.