Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-76
01-05 ASSIGN RING
HUNT 620 U:U:U
To assign CO ring to the Hunt group, dial “y” to assign ringing
mode for the selected hunt group. (See Table 4.3.1)
(There is no delay ring available in this case.)
01-05 ASSIGN RING
STA 120 U:U:U
To assign CO ring to any station of hunt group, enter a station
number. Dial “y” to assign ringing mode for the selected
station. (See Table 4.3.1)
CO LINE RING
ENTER CO RANGE
(4) Press the
[HOLD/SAVE]
button for updating database
permanently. System goes to Step 1).
01-05 ASSIGN RING
PRESS FLEX KEY 1-2
(5) Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step 2) with no updating system memory.
UD
ITEM
RANGE
REMARK
LCD DISPLAY FORMAT
U
Ringing Status
0-4
0: Unassigned
1: Day Ring assignment
2: Night Ring assignment
3: Day & Night Ring assignment
4: On-demand Ring assignment
U : Unassigned
D : Day Ring
N : Night Ring
O : On-Demand Ring
H : Ring assigned to Hunt group
S : Ring assigned to Station
D
Delay Ring
Counter
0-9
about 3sec./counter
Note
: for station only, not hunt group
TABLE 4.3.1 Description of Data „y‟ & „d‟ (PGM 32)