Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-58
BTN
DEFAULT
RANGE
REMARK
1
GROUP 01
01 - 05
ICM tenancy group number which stations belong to.
2
-
STA No.
Attendant station of assigned ICM tenancy group
3
GROUP 01
BTN 01 - 10
ICM tenancy groups allow to access for assigned group
TABLE 3.7.1 Button Configuration of ICM Tenancy Group (PGM 16)
3.8 INTERNAL PAGE ZONE (PGM 17)
Each station is assigned to internal paging zone. A station can be in any or no zone at all. Internal all
call is defined as the sum of all zones. If a station is not in any internal zone, it will not receive any
page announcement. The ARIA-FPII system supports 5 internal paging zones, ARIA-100 supports 15
internal paging zones, and ARIA-162 supports 20 internal paging zones.
Default assigns all stations to Internal Page Zone 1.
PROCEDURE
INTERNAL PAGE ZONE
ENTER STA RANGE
(1)
[TRANS/PGM]
+ 17.
100-110 PAGE ZONE
PRESS FLEX KEY 1-xx
(2) Enter station range (Ex 100-110). LEDs of BTNs show currently
assigned page zones of the first station in range.
(3) To assign internal page zone to the stations, press one of BTNs
for toggle setting. Each BTN means Internal Page Zone 1-xx.
(LED ON: Stations are in the internal page zones. LED OFF:
Stations are not in the internal page zones.)
INTERNAL PAGE ZONE
ENTER STA RANGE
(4) Press the
[HOLD/SAVE]
button for updating database
permanently.
INTERNAL PAGE ZONE
ENTER STA RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) with no updating system memory.