Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-124
5.32 VM DIALING TABLE (PGM 73)
DTMF (Inband) signal between ARIA and VM equipment.
PROCEDURE
VOICE MAIL DIALING TBL
ENTER FLEX KEY (1-9)
(1)
[TRANS/PGM]
+ 73.
VOICE MAIL 1
PREFIX OR SUFFIX (0-1)
(2) To program each dialing table, press BTN as Table 5.32.1.
VOICE MAIL 1
PRE XXXXXXXXXXXX
(3) Enter digits (0-9, *, #, pause) within 12 characters. To enter the
pause, press the
[FLASH]
button. (Note: to enter a pause,
press the flash key ).
ENTER PROGRAM CODE
(7)(4)
Press the
[HOLD/SAVE]
button for updating database
permanently.
ENTER PROGRAM CODE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to
PGM number enter
mode
without updating
system memory.
BTN
ITEM
DEFAULT
REMARK
1
VM Table 1
Prefix : P#
P##
Suffix : -
Put Mail (default) (
change to P)
2
VM Table 2
Prefix : P##
P#
Suffix : -
Get Mail (default) (
change to P9)
3
VM Table 3
Prefix : -
P##
Suffix : -
Assigned by PGM 48
4
VM Table 4
Prefix : P#*0P
P##
Suffix : -
Assigned by PGM 48
5
VM Table 5
Prefix : P#*4P
P##
Suffix : -
No Answer Table
(change to P)
6
VM Table 6
Prefix : P#*5P
P##
Suffix : -
Error Table
(change to P)
7
VM Table 7
Prefix : P#*3P
P##
Suffix : -
Busy Table
(change to P)
8
VM Table 8
Prefix : P#*6P
P##
Suffix : -
DND Table
(change to P)
9
VM Table 9
*****
Disconnect Table
Entrees in BLUE are for the M2 Message Mate
TABLE 5.32.1
Voice Mail Table (PGM 73)
Formatted: Bullets and Numbering