Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-46
BTN
ITEM
RANGE
REMARK
1
Prefix Code Insertion (incoming)
0(OFF) / 1(ON)
Default (OFF)
2
My Area Code
MAX 5 digits
Default (empty)
3
CO ATD Code
MAX 2 digits
Default (empty)
4
DID Digits Conversion Type
0, 1, 2
0: same as previous version (1.xx, 2.xx)
according to DID Digits Conversion Table
(PGM 55) only. (default)
1: according to PGM 01(Digits Analysis
Table)
2: It is converted with PGM 55 and follow
PGM 05.
5
Calling Sub-Address
0(OFF) / 1(ON)
Default (OFF)
If this field is set ON then ARIA sends the
calling extension number in calling party
sub address information of setup message.
6
Type of Calling Number
0-4
0 : Unknown number
1 : International type
2 : National number - default
3 : Network number type
4 : Subscriber number type
7
Type of AOC
0-5
0: Do not service AOC
1: For Italy and Spain
2: For Finland
3: For Australia
4: For Belgium
5: Standard
8
Prefix Code Insertion (Outgoing)
0(OFF) / 1(ON)
Default (ON)
9
Forced Page Index
00-20
Default (00)
Default (15) - For CIS
10
-Law Line Installed
0(OFF) / 1(ON)
Default (OFF)
11
ISDN Sending Mode
0(OFF) / 1(ON)
Default (OFF)
12
Enblock Inter-digit Timer
Depends on country adaptation
13
Prefix Code
2 digits
Default : 0
14
International Access Code
4 digits
Default: empty
If the CLI type is
„1‟(international), the
system will add the international access
code for correct call back later.
15
LCR Display/Print Mode
0 (Real)/1 (User)
Default: User
User: Print/save user dialed digits in SMDR
Real: Print/save real sending digits to PX
TABLE 2.8.1 Station Attribute - IV (PGM 08)