Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-116
5.24 SMDR ATTRIBUTES - II (PGM 63)
PROCEDURE
SMDR COST PER UNIT
COST:000000 FRAC:0
(1)
[TRANS/PGM]
+ 63. LEDs of BTN 2 and LCD show current
status of SMDR attributes - II.
(2) To program SMDR attributes-II, use the Flex. Buttons as Table
5.24.1.
To program SMDR Cost per Unit,
press BTN 1 and enter 6 digits.
To assign SMDR Fraction, press BTN 2 and enter 1 digit (0-5).
See Table 5.24.1.
ENTER PROGRAM CODE
(5)(3)
Press the
[HOLD/SAVE]
button for updating database
permanently.
ENTER PROGRAM CODE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to
PGM number enter
mode
without updating
system memory.
BTN
ITEM
DEFAULT
RANGE
1
SMDR Cost Unit
000000
6 digits
2
SMDR Fraction
0
0 - 5
TABLE 5.24.1 Button Configuration for SMDR Attributes - II (PGM 63)
Ex) No Of Metering Pulse
= 2, SMDR Cost Unit = 000156
- SMDR Fraction 0 : 2 x 156 = 312
- SMDR Fraction 1 : 2 x 15.6 = 31.2
- SMDR Fraction 2 : 2 x 1.56 = 3.12
- SMDR Fraction 3 : 2 x 0.156 = 0.312
- SMDR Fraction 4 : 2 x 0.0156 = 0.0312
- SMDR Fraction 5 : 2 x 0.00156 = 0.00312
TABLE 5.24.2 Example of Calculation Method of Call Charge (PGM 63)
Formatted: Bullets and Numbering