Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-52
3.4 STATION ID (PGM 13)
When the system is initialized, all station's ID will be assigned keyset as default.
PROCEDURE
STATION ID ASSIGN
ENTER STA RANGE
(1)
[TRANS/PGM]
+ 13.
100-110
KEYSET
(2) Enter station range (Ex 100-110). Initially LED shows
associated item's status of the first station in the range. LED of
BTN (one of 1-12) related each ID type will be lit.
Note
: If you want to identify a station as a DSS/DLS, you must enter
two station numbers as the same number.
(3) To program, use the BTN as Table 3.4.1 Press one of BTN 1-
12, then selected station ID will be displayed and LED of
selected BTN will be lit.
Note
: When identifying a station as a DSS/DLS, you must enter the
station number of the key station the DSS/DLS is associated
with, not extension number that the DSS/DLS is using. See
also Table 3.4.2 for DSS/DLS default button configuration.
To display each station ID, press Flex. Button 13, then will be
displayed 5 station's ID with ascending order for station range
which assigning step (2). Press [
] button continuously, will be
displayed next 5 station's ID until last station in range.
STATION ID ASSIGN
ENTER STA RANGE
(7)(4)
Press the
[HOLD/SAVE]
button for updating database
permanently.
STATION ID ASSIGN
ENTER STA RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) with no updating system memory.
Formatted: Bullets and Numbering