
Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-65
ISDN STATION ATTRIBUTES
ENTER STA RANGE
(14) Press the
[HOLD/SAVE]
button for updating database
permanently.
ISDN STATION ATTRIBUTES
ENTER STA RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to initial admin state with no updating system
memory.
BTN
FIELD
REMARK
1
Sub Address
This field is determined that ISDN station uses Sub Address or not.
1: SUB ADDRESS ON, 0: SUB ADDRESS OFF.
Default value : OFF
2
Long / Short
This field is determined that ISDN Station is short passive mode or not.
1: LONG, 0: SHORT
Default value : SHORT
3
MSN
This field is determined that ISDN station uses MSN or not.
1: MSN ON, 0: MSN OFF
Default value : OFF
4
EXT or CO ATD Selects EXT(extension number) or CO ATD(PGM 08-BTN 3) to make out going CLI
or COLP information
1: EXT (extension), 0: CO ATD CODE (PGM 08-BTN 3)
Default value : ON (Extension number)
5
PROGRESS IND This field is determined that ARIA send progress indication information in setup
message for SLT (FAX or MODEM).
1: Send progress indication, 0: Not send progress indication.
Default value : OFF
6
CO MSG WAIT
This field is determined that a station receive CO message wait or not.
1: Use CO message wait, 0: Not use CO message wait
Default value : OFF
7
STA BASE CLIP
This field is determined that a station will show “Calling Party Number” in LCD or not.
1: Calling party number will be shown in LCD.
0: Calling party number will not be shown in LCD.
Default value : ON
8
STA BASE COLP This field is determined that a s
tation will show “Connected party number” in LCD or not.
1: Connected party number will be shown in LCD.
0: Connected party number will not be shown in LCD.
Default value : OFF
9
STA BASE CPN This field is determined that ARIA send called party number with MSN/Sub address or
not.
0: Send only MSN/Sub address
1: Send extension number for called party number in SETUP message
2: Send for called party number in SETUP message
Default value : 0