Aria Aria-100, Programming Manual, Page: 124 / 163

Programming Manual for Digital Key Telephone System GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-119
BTN ITEM
1 Digital Keyset RX Gain Control
2 Analog Keyset RX Gain Control
3 SLT RX Gain Control
4 CO Line RX Gain Control
5 DVU RX Gain Control
6 DTMF-Receiver RX Gain Control
7 External Page RX Gain Control
8 Modem TX/ RX Gain Control
9 CPT RX Gain Control
10 Digital CO RX Gain Control
11 Wireless Terminal RX Gain Control
12 Digital CO RX Gain Control for R2 Sender
TABLE 5.26.2 Button Configuration for System Gain Control (PGM 66)
5.27 SYSTEM SPEED ZONE ACCESS (PGM 67)
PROCEDURE
SYSTEM SPD ZONE PGM
ENTER ZONE NO (01-xx)
(1) [TRANS/PGM] + 67.
SYSTEM SPD ZONE 01
ZONE STA TCHK
(2) Enter Zone Number (01 - xx).
ENTER NEW ZONE RANGE
ZONE 01 : xxx - xxx
(4)(3) To enter speed zone range, press BTN 1 and dial related new
zone range.
ENTER NEW STA RANGE
ZONE 01 : xxx - xxx
(5)(4) To enter station range, press BTN 2 and dial related new
station range.
(6)(5) To toggle speed zone toll check, press BTN 3, then LED 3
shows toll check status of current zone.
ENTER PROGRAM CODE
(7)(6) Press the [HOLD/SAVE] button for updating database
permanently.
ENTER PROGRAM CODE

Press [

] button instead of the [HOLD/SAVE] button, then
system goes to PGM number enter mode without updating
system memory.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering