Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-115
BTN
ITEM
DEFAULT(LED)
RANGE
REMARK
1
SMDR Save
NO (OFF)
YES/NO
The system can be set to record either all outgoing
calls (ALL) or only limit set by timer in PGM 44 (See
Flex button 15 : SMDR Timer)
2
SMDR Print
Enable
NO (OFF)
YES/NO
The system can be set to real time print either all
outgoing calls (ALL) or only limit set by timer in PGM
44 (See Flex button 15 : SMDR Timer)
3
Long
Distance /
All Call
Recorded
LD (ON)
LD
/All Call
The system can be set to record either all outgoing calls
or only long distance calls, exceeding time limit set by
SMDR timer. The long distance calls are identified by
SMDR long distance code programming (PGM 53).
4
Incoming
Call
NO (OFF)
YES/NO
If this option (PIC) is set to YES, all incoming calls
are printed with either all outgoing calls or long
distance calls.
5
Records in
detail
YES (ON)
YES/NO
Due to limited system memory size, in places where
many calls take place, the SMDR record buffer can
easily saturated. So, if the customer doesn't need the
detailed call information but total call, total metering
count and total cost for individual station, then it is
possible to save only the total accumulation, rather
than the whole detailed records.
6
SMDR Print
Baud Rate
6
1 - 8
The baud rate for the printer can be set to 300, 600,
1200, 2400, 4800, 9600, 19200, or 38400 baud.
7
SMDR
Currency
Unit
-
3 English
Characters
For easy identification of call cost, the currency unit
can be input with 3 alphabet characters to be printed
in front of call charge amount.
TABLE 5.23.2 Button Configuration for SMDR Attributes - I (PGM 62)