Programming Manual for Digital Key Telephone System
GDK-162/100/34e
Admin Programming
99A Software 1/6/00
A-63
3.13 CTI STATION ATTRIBUTE (PGM 22)
This sets the features/modes used when CTIU8/30 or CTI module is connected at a key station.
PROCEDURE
CTI STATION ATT
ENTER STA RANGE
(1)
[TRANS/PGM]
+ 22.
100-110 (KEY 01-02)
CTI MODE B1200
(2) Enter station range (Ex.100 - 110). LCD shows current status of
the first station in range.
(3) To program, use the Flex Buttons as Table 3.13.1. To program
the CTI station's mode, press Flex. Button 1 and dial CTI mode
1-3. By default, CTI station's mode is CTI mode (2).
To program the CTI station's baud rate, press Flex. Button 2
and dial baud rate 1-3. By default, CTI station's baud rate is
1200 (1).
CTI STATION ATT
ENTER STA RANGE
(4) Press the
[HOLD/SAVE]
button for updating database
permanently.
CTI STATION ATT
ENTER STA RANGE
Press [
] button instead of the
[HOLD/SAVE]
button, then
system goes to step (1) with no updating system memory.
BTN
ITEM
DEFAULT(LED)
RANGE
REMARK
1
CTI Station
Mode
2 (OFF)
1-3
Determines the CTI keyset mode
1: Inactive, 2: CTI Mode, 3: AT Mode
2
CTI Station's
Baud Rate
2 (OFF)
1-3
Determines the baud rate of the CTI keyset
1: 1200, 2: 2400, 3: 4800
TABLE 2.13.1 Button Configuration for CTI Station Attribute (PGM 22)