manualshive.com logo in svg

Analog Devices SHARC ADSP-214 Series, Hardware Reference Manual, Page: 941 / 1192

Share
Download
Analog Devices SHARC ADSP-214 Series Hardware Reference Manual Download Page 941

ADSP-214xx SHARC Processor Hardware Reference

A-115 

Registers Reference

Current Count (WDTCURCNT)

The 

WDTCURCNT

 register contains the current count value of the watchdog 

timer. Reads to 

WDTCURCNT

 return the current count value. For added 

safety, this register can only be updated when WDT configuration space is 
unlocked by programming the command in the 

WDTUNLOCK

 register. Values 

cannot be stored directly in 

WDTCURCNT

, but are instead copied from 

WDTCNT

.

Enabling the watchdog timer does not automatically reload 

WDTCURCNT

 

from 

WDTCNT

. The 

WDTCURCNT

 register is a 32-bit unsigned system mem-

ory-mapped register that must be accessed with 32-bit reads and writes. 

Trip Counter (WDTTRIP)

The WDT contains a software programmable register 

WDTTRIP

 that sets 

the number of times that the WDT can expire before the 

WDTRSTO

 pin is 

continually asserted until the next time hardware reset is applied. This reg-
ister is unaffected by WDT generated reset. This register can only be 

Table A-72. WDTSTATUS Register Bit Descriptions (RO)

Bit

Name

Description

0 (W1C)

WDRO 

Watchdog Expired.

 Indicates that DSP core attempted to write 

to WDT configuration space without an unlock “command”. Bit 
is set when the above exception occurs. Software can determine 
whether the watchdog has expired by interrogating this bit. This 
is a sticky bit that is set whenever the watchdog timer count 
reaches 0. 

1 (W1C)

WDERR 

Watchdog Error.

 Indicates that watchdog timer has expired. Bit 

is set when counter expires. Attempts by the core to write to the 
WDT configuration space without an unlock command, causes 
the WDT to expire and this condition is captured in the watch-
dog exception field. This is a sticky bit that is set whenever the 
above exception occurs. 

www.BDTIC.com/ADI

Summary of Contents for SHARC ADSP-214 Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments