manualshive.com logo in svg

Analog Devices SHARC ADSP-214 Series, Hardware Reference Manual, Page: 393 / 1192

Share
Download
Analog Devices SHARC ADSP-214 Series Hardware Reference Manual Download Page 393

ADSP-214xx SHARC Processor Hardware Reference

7-25 

Pulse Width Modulation

The PWM sync enable feature allows programs to enable the 

PWN_SYNC_ENx

 bits to independently start the main counter without 

enabling the corresponding PWM module using the 

PWM_ENx

 bits. To syn-

chronize different groups, enable the corresponding group’s 

PWM_ENx

 bit at 

the same time. In order to stop the counter both the 

PWM_DISx

 and 

PWM_SYNC_DISx

 bits should be set in this register.

Interrupts

The following sections provide information on the PWM and interrupt 
generation. 

Table 7-5

 provides an overview of PWM interrupts.

Typically the PWM interrupt is used to periodically execute an interrupt 
service routine (ISR) to update the two PWM channel duties according to 
a control algorithm based on expected system operation. The PWM inter-
rupt can trigger the ADC to sample data for use during the ISR. During 
processor boot the PWM is initialized and program flow enters a wait 
loop. When a PWM interrupt occurs, the ADC samples data, the data is 
algorithmically interpreted, and new PWM channel duties are calculated 
and written to the PWM. More sophisticated implementations include 
different startup, runtime, and shutdown algorithms to determine PWM 
channel duties based on expected behavior and further features.

During initialization, the 

PWMTM

 register is written to define the PWM 

period and the 

PWMCHx

 registers are written to define the initial channel 

pulse widths. The PWM interrupt is assigned to one of the core’s User

Table 7-5. PWM Interrupt Overview

Interrupt Source

Interrupt 
Condition

Interrupt 
Completion

Interrupt Acknowledge

Default IVT

PWM (Edge/center 
aligned, single/double 
update, 4 channels)

Period start

W1C (Write 1-to-clear) 
PW RTI 
instruction

Need to route  
PWMI (PICRx) 
to any PxxI

www.BDTIC.com/ADI

Summary of Contents for SHARC ADSP-214 Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments