Home
/
Analog Devices
/
SHARC ADSP-214 Series
/
Hardware Reference Manual

Analog Devices SHARC ADSP-214 Series, Hardware Reference Manual, Page: 141 / 1192

Share

Page: 141 / 1192

Analog Devices SHARC ADSP-214 Series Hardware Reference Manual Download Page 141

ADSP-214xx SHARC Processor Hardware Reference

3-11

External Port

Features

The AMI has the following features and capabilities.

• User defined combinations of programmable wait states

• External hardware acknowledge signals

• Data packing support for 8 and 16 bits (ADSP-2147x and

ADSP-2148x)

• External instruction fetch from 8 and 16 bits

• Both the processor core and the I/O processor have access to exter-

nal memory using the AMI.

• Support a glueless interface with any of the standard SRAMs.

• Bank 0 can accommodate up to 6.2M words, and banks 1, 2, and 3

can accommodate up to 8M words each (ADSP-2147x and
ADSP-2148x)

• Bank 0 can accommodate up to 2M words, and banks 1, 2, and 3

can accommodate up to 4M words each (ADSP-2146x)

Functional Description

The following sections provide a functional overview of the asynchronous
memory interface.

The AMI communicates with SRAM, FLASH and any other memory
device that conforms to its protocol. It provides a DMA interface between
internal memory and external memory, performs instruction (48-bit) fetch
from external memory, and directs core access to external memory loca-
tions. The AMI on the ADSP-2147x and ADSP-2148x supports 8- and
16-bit data access to external memory.

www.BDTIC.com/ADI

«
...
139
140
141
142
143
...
»

Summary of Contents for SHARC ADSP-214 Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments