2/6
C 42
M4 monitoring system function table
G 01074 - Edition 08 - Januar
y 10
DEFINITION
Selection
Choice
Description
Initial
configuration
LANGUAGE
ENGLISH
FRENCH
All the menus are in the selected language.
ENGLISH
SYSTEM SELECT.
ADP122
ADS602
ADS602V
(1)
ADS1202
ADS1802
Select the pump monitored by the monitoring
system.
(V indicates that the Roots is fitted with convertor
option)
According
to the
pump
AUTO START.
ENABLED
DISABLED
Allows the pump to restart automatically after a
power cut, irrespective of the duration.
DISABLED
ANALOG INPUT
ENABLED
DISABLED
Allows retrieving analogic data.
This input is not available on ADS 602V
(1)
,
ADS 1202, ADS 1802 systems.
DISABLED
LOG.1 INPUT*
ENABLED
DISABLED
Allows retrieving logic data on LOG.1 input
using a customer supplied sensor (closed when
switched off).
This input stays
DISABLED
if parameter
LL PUMP OPTION
is enabled.
(1)
DISABLED
LOG.2 INPUT*
ENABLED
DISABLED
Allows retrieving logic data on LOG.2 input
using a customer supplied sensor (closed when
switched off).
This input stays
DISABLED
if
ADS 1202/
ADS 1802 system
is selected.
DISABLED
LOG.3 INPUT*
ENABLED
DISABLED
Allows retrieving logic data on LOG.3 input
using a customer supplied sensor (closed when
switched off).
This input stays
DISABLED
if parameter
LL PUMP OPTION
is enabled.
(1)
DISABLED
ROOTS CMD
ENABLED
DISABLED
Allows separate control of the Roots START/STOP
control from the ADP START/STOP, instead of
simultaneous start-up, the Roots is started using
ROOTS
key or remote controlled.
DISABLED
(1): For no-standard configuration.
* : LOG.1, LOG.2, LOG.3 correspond to LI1, LI2, LI3 sensors (see
D 10
)
SET
ENTER
ENTER
adixen Vacuum Products - Operating instructions - ADP/ADS Series Two
