2/3
C 41
Start up of the monitoring system
G 01068 - Edition 05 - Januar
y 10
The monitoring displays the state of the pump.
The star appears on the left side of
the display and indicates that the
control has been taken by hand-
held remote control (control taken
to check the direction of rotation).
The M4 monitoring system has been configured in the factory
according to the options and accessories defined during the order.
This configuration allows the pump to run (see
C 30
).
If parameters have to be customized by the user, it is necessary to
gain access to the program.
The programing made at the factory is protected by an access code
which disables parameter modification.
Press the
SET
key.
Valid the code with
ENTER
.
(“0” factory configuration).
Access code and parameters can be
customized (see
C 42
).
* 1H LOC
ROOTS
PUMPING STOPPED
13/10/06 15:39
Pump start-up
Position the main switch to position
1
.
The “mains on“ light indicator comes on.
Access to
the parameter settings
ENTER PASSWORD :
CODE : 0
Mains on
Main switch
adixen Vacuum Products - Operating instructions - ADP/ADS Series Two
