2/4
B 50
Electrical connection
G 01055 - Edition 07 - Januar
y 10
Electrical connection
using a plug
Then, connect the connector on the pump frame and
lock it
.
The pump is supplied with a female plug separately packaged.
Connect the green lead to the ground on the connector.
Connect the mains cable to the power supply connector using wires
with the following specifications:
– AWG-12 (or 2.5 mm
2
) for ADP 122
– AWG-10 (or 4 mm
2
) for ADS 602/ADS 1202/ADS 1802.
Facilities on the top
Female plug
(6 co Earth)
Facilities
at the rear
6
Earth
W
V
U
Not used
3
2
1
5
4
Main cable
Motor rotation is defined by main power connection.
Uncorrect wiring may cause backwards pump rotating.
Check rotation sense at first start up (see
B 51
).
Check that the cable is correctly protected against ground defects and that
earth wire is longer than the three conducting wires.
adixen Vacuum Products - Operating instructions - ADP/ADS Series Two
