![background image](http://html.mh-extra.com/html/accu-chek/inform-2/inform-2_operators-manual_455938057.webp)
Glucose Control Testing
56
Performing glucose control tests
Overview of test procedure
A glucose control test using control solution comprises
the following steps:
n
Select the desired level of control solution for the
test.
n
Check the lot number of the control solution.
n
Check the lot number of the test strips.
n
Perform the test with the control solution.
As mentioned previously, the following steps must be
completed already:
1
The meter is switched on.
2
You have entered your operator ID.
3
You have completed login by selecting
and
the
Main Menu
screen is displayed.
The result must fall within the specified range (as shown
on the label of the test strip vial or defined per
configuration) for the control test to be completed
successfully. Patient tests can now be performed (again).
Summary of Contents for Inform 2
