Accu-Chek Inform 2, Operator'S Manual

Page: 150 / 199

General Product Information
149
A Appendix
Table of configuration options
This section provides an overview of all the settings
avail able.
The two rightmost columns describe the accessibility of a
configuration parameter on the device ( Setup Menu ) and
via the data management system (DMS).
“Y” (Yes) means, that this parameter is available, “N” (No)
means, that this parameter is not available using the
respective configuration method.
DEVICE: If the meter is configured by a system
administrator using a data management system, the
configuration options on the meter may be disabled to
avoid conflicts in the settings. This option is indicated
by the use of parentheses e.g., (Y).
DMS: Configuration options may vary depending on
available DMS settings.
Configuration options
Subject/Attribute Range Default Device DMS
Timer
Shutdown timeout (meter powers off if no
activity)
30 - 3,600 s 300 N Y
Beeper
Beeper volume 0: low
1: medium
2: high
2 Y Y
Measurement Flow
Comments required 0: optional
1: out of range
2: required
3: disabled
0 N Y
Comments requirement level: if out of ...
(only valid if Comments required = 1)
0: normal range
1: critical range
2: reportable range
3: measurement range
0 N Y