Introduction
29
Overview of the accessory box
The accessory box provides an area for storing and
trans porting consumables needed for performing
point-of-care blood glucose tests.
Reagents and consumables
You need the following reagents to perform patient tests
and glucose control tests:
n
ACCU-CHEK Inform II Test Strips
n
ACCU-CHEK Inform II Control Solutions: Available
for purchase separately, consists of two 2.5 mL
bottles. One bottle contains the Level 1 (Lo) control,
while the other bottle contains the Level 2 (Hi)
control.
n
ACCU-CHEK Linearity Kit (if required by your
facility guidelines): Available for purchase
separately, contains six 2.5 mL bottles. These
bottles span the glucose range in six levels (L1 to
L6)
Your facility provides additional consumables such as
blood collection supplies. Observe the current rules and
safety guidelines for collecting and handling blood
samples.
Instructions for initial setup
The meter must be configured prior to initial use. During
this setup, the following parameters are configured:
n
Date and time format
n
Input mode for Patient ID
Summary of Contents for Inform 2
