Accu-Chek Inform 2 Operator'S Manual Download

Page: 23 / 199

Introduction

Roche supports industry wireless standards and

recom mends using products that have Wi-Fi certification.

This certification tests products to the 802.11 industry

stan dards for basic connectivity, security, authentication,

Quality of Service (QoS), interoperability and reliability.

The Wi-Fi CERTIFIED

logo is an assurance that the Wi-Fi

Alliance

has tested a product in numerous

configurations and with a diverse sampling of other

devices to ensure compatibility with other Wi-Fi

CERTIFIED equipment that operates in the same

frequency band. The Wi-Fi Alliance network of

independent test labs conducts interoperability testing

programs to ensure that wireless devices work together

and support secure connections.
The ACCU-CHEK Inform II system complies with FCC

radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and

operated with mini mum distance of 8 inches (20 cm)

between the radiator and your body.
This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter.

Changes or modifications made to this equipment not

expressly approved by Roche Diagnostics may void the

FCC authorization to operate this equipment.
This device complies with Part 15 of the FCC Rules and

with RSS-210 of Industry Canada. Operation is subject to

the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received,

including interference that may cause undesired

opera tion.
The ACCU-CHEK Inform II system complies with the

emission and immunity requirements described in

IEC 61326-2-6:2006. It has been designed and tested to

CISPR 11 Class B.
In a domestic environment it may cause radio

interference, in which case, you may need to take

measures to mitigate the interference.
The electromagnetic environment in which the ACCU-

CHEK Inform II device will be operated should be

thoroughly evaluated prior to operation of the device.

Summary of Contents for Inform 2







































































































































































































Search results

Summary of Contents for Inform 2

Reviews:

Related manuals for Inform 2

Brands by name

Popular brands

Accu-Chek Inform 2, Operator'S Manual

Search results

Summary of Contents for Inform 2

Reviews:

Related manuals for Inform 2

Brands by name

Popular brands