Accu-Chek Inform 2, Operator'S Manual

Page: 154 / 199

Appendix
153
Subject/Attribute Range Default Device DMS
Operator ID min length 0 – 20 0 Y Y
Operator ID timeout (determines the time in
sec that an operator remains logged in after
power down). 0 sec disables this feature.
0 – 3,600sec 0 N Y
Operator password length 4-20 characters (only a-z,
0-9 allowed)
N/A N N
Operator certification expiry warning 0-90 days 0 (=off) N Y
Operator Name length 0-25 characters N/A N N
Operator ID and patient ID barcode masks
Operator ID barcode mask (see separate
table at the end of this chapter)
0 – 300 characters* “” N Y
Patient ID barcode mask (see separate
table at the end of this chapter)
0 – 300 characters* “” N Y
* The number of characters in the unmasked barcode may not exceed 20.
Patient ID
Patient ID confirmation 0: disabled
1: name
2: date of birth (DOB)*
3: name/DOB*
0 N Y
* Depends on available DMS settings.
Patient ID entry mode
0: Keyboard / Scan
1: List / Keyboard / Scan
2: Scan only
3: Prompt (numeric)
0 Y Y
Patient ID validation mode
(Allowed characters: a-z, 0-9,
“.” [period], “-” [hyphen])
0: none
1: length
2: list
3: list allowing entry if not
on list
4: length if numeric
0 Y Y
Patient ID maximum length (used to
validate a patient ID if patient ID validation
mode is set to “Length”
0-20 20 Y Y
Patient ID minimum length (used to
validate a patient ID if patient ID validation
mode is set to “Length”
0-20 0 Y Y
Patient name length 0-25 characters N/A N N