Accu-Chek Inform 2 Operator'S Manual Download

Page: 120 / 199

Initial Startup

119

Creating a setup password

This screen allows you to create a password for all the

settings described in this chapter, as well as for editing

date/time and lot information (if password protected). The

setup password ensures that only authorized persons can

make changes to the setup.

Please note that password protection can only be reset

or modified after entering the current password.

Proper authentication is required to access the

Setup

Menu

. Store your password in a safe place.

Use the keypad to enter the password.

Touch

to save the password and enable

password protection. (Password protection will

take effect only after the next power on.) The

display returns to the

Setup Menu

, or:

Touch

to exit this screen without saving any

changes. The display returns to the

Main Menu

To disable password protection:
1

Open the

Setup Menu

(you must enter the current

password).

Touch

Password

Delete the current password by touching

Touch

to disable password protection.

A-O

Setup Password

12:48 pm

09/18/13

Summary of Contents for Inform 2







































































































































































































Search results

Summary of Contents for Inform 2

Reviews:

Related manuals for Inform 2

Brands by name

Popular brands

Accu-Chek Inform 2, Operator'S Manual

Search results

Summary of Contents for Inform 2

Reviews:

Related manuals for Inform 2

Brands by name

Popular brands