Introduction
26
Overview of the code key reader
Test strip vials include a code key.
1
This code key is read
by the code key reader and the data is sent to the meter.
For additional information about the code key reader, see
Chapter 6.
The code key reader has the following elements:
8
Code key slot
9
LED (green) for displaying status
10
Infrared window for transmitting the code file to the
meter
Do not exchange code keys while the Code Key
Reader LED status light is still flashing green. If the
Code Key Reader is still flashing green, it will continue
to transmit the previously loaded code file and ignore
the code file on the newly inserted code key. You may
get an error message on the meter.
1 The
code key
is also frequently referred to as a
code chip
. The
terms are synonymous.
10
9
8
Summary of Contents for Inform 2
