Powering Up and Entering an Operator ID
31
2 Powering Up and Entering an Operator ID
Powering up the meter
1
Press and release the On/Off button . The meter
is now on.
2
The
Power Up
screen appears.
3
Check in the
Power Up
screen whether the date
(lower left) and time (upper right) are displayed
correctly. If necessary, refer to the instructions for
updating these settings in Chapter 9.
Contrast
Power Up
12:48 pm
09/18/13
Performing self-checks...
n
If during self-check an error is detected, the
appropriate error message appears on-screen.
n
If the
QC Lockout
feature is enabled and glucose
control is required, a corresponding message is
displayed.
The battery icon shows the current battery level.
A completely filled icon
indicates a fully
charged battery, and a partial charge is displayed
as a partially filled battery icon
. If the battery
is nearly empty, the battery icon turns red
.
Summary of Contents for Inform 2
