Accu-Chek Inform 2 Operator'S Manual Download

Page: 190 / 199

Supplement for Observed Test Sequence

189

Operator:

Touch

Glucose Test

Perform the patient test as usual. Once the test is

completed, the observer has to complete the next steps.

Hand the meter back to the observer.

Observer Login

I-301: Observer

Alan

Smithee

, please log in to

proceed. Otherwise the

OTS test will not be

complete.

OTS

Valid Glucose Result

Yes

OTS

Pass

Fail

12:48 pm

09/18/13

Patient Test - OTS

Range

150

Patient 123456789

Date 09/18/13 12:48 pm

mg/dL

09/18/13

12:48 pm

Observer:

Touch

to log in again.

After you enter your password, touch

proceed with the assessment

Assess the test result validity by touching

Yes

Assess the operator’s performance by touching

Pass

Fail

Touch

, if you want to add a comment.

Touch

to return to the

Main Menu

screen.

The OTS information is saved together with the test result.

Summary of Contents for Inform 2







































































































































































































Search results

Summary of Contents for Inform 2

Reviews:

Related manuals for Inform 2

Brands by name

Popular brands

Accu-Chek Inform 2, Operator'S Manual

Search results

Summary of Contents for Inform 2

Reviews:

Related manuals for Inform 2

Brands by name

Popular brands