Accu-Chek Inform 2, Operator'S Manual

Page: 118 / 199

Initial Startup
117
Options for Operator ID Entry
This menu allows you to specify if and how operator login
is performed.
1
Touch the desired option to enable it:
n
Operator Entry
– None : The meter can be used without operator
login.
– Prompt or Prompt (numeric only) : Operator login is
required. The Operator ID can be entered manually
via keypad or via barcode scanner.
– Scan only : Operator login is required. Entry of ID via
barcode scanner only.
n
Operator Validation
– None : The operator ID can have any length.
– Length : The operator ID must be a specified length
(up to 20 characters). Enter the minimum and
maximum lengths after selecting this option.
– List: The operator ID must be on a list received from
the DMS.
– List with password: The operator ID must be on a
list received from the data management system
(DMS). Additionally, a password must be entered.
2 Touch to save the settings. If the Length
option is enabled, enter the desired numbers, or:
3 Touch to exit this menu without saving any
changes.
The display returns in both cases to the Setup Menu .
Operator ID Entry
Prompt
None
Length
Scan only
None
Operator Entry
Operator Validation
Prompt (numeric only)
List
List with password
12:48 pm
09/18/13
1 2 3
4 5 6
7 8 9
0
Op. ID Min Length
8
12:48 pm
09/18/13
1 2 3
4 5 6
7 8 9
0
Op. ID Max Length
12
12:48 pm
09/18/13