Accu-Chek Inform 2 Operator'S Manual Download

Page: 64 / 199

Glucose Control Testing

Performing a STAT test

The meter can be configured to allow a STAT patient

glu cose test to be run even if the meter is in QC Lockout

or Download Lockout. This option is to be used in

situations with critical patients. The system administrator

can allow control tests to be delayed one to nine times.

Run STAT

appears in the

QC Lockout

warning box under

the following conditions:

You are successfully logged in and have selected

Patient Test

from the main menu.

A glucose control test is required (due to specified

control intervals or other conditions).

The administrator has enabled the STAT test option

during setup.

The number of STAT tests available has not been

exceeded.

If these conditions are fulfilled, two buttons appear in the

warning message that allow you to choose the next step:

Touch

Run QC

to run the required control test

instead of a patient test.

Touch

Run STAT

to perform a patient test even if a

glucose control test is required. The status as STAT

test is stored with the data record for the test.

If the meter is in a

Download Lockout

status, and no

STAT test is available, the meter can be unlocked by a

system administrator (see page 133).

Glucose Test

Patient Test Menu

Run QC

Run STAT

QC Lockout

D-513: Warning! Glucose

control is due. Required

Controls must be run in

order to proceed. 9 STAT

test(s) available.

12:48 pm

09/18/13

Summary of Contents for Inform 2







































































































































































































Search results

Summary of Contents for Inform 2

Reviews:

Related manuals for Inform 2

Brands by name

Popular brands

Accu-Chek Inform 2, Operator'S Manual

Search results

Summary of Contents for Inform 2

Reviews:

Related manuals for Inform 2

Brands by name

Popular brands