Ziton ZP3, Руководство по установке и обслуживанию

Страница: 7 / 163

ZP3 Fire Control Panel Installation, Commissioning, and Maintenance Manual v
This product is CPD approved. Certification details are shown in the table below.
+ ,
Certification
Certification body 1134
Certificate number 1134-CPD-089
EN 54 EN 54-2: 1997+A1: 2006
EN 54-4: 1997+A1: 2002+A2: 2006
Manufacturer UTC Fire & Security South Africa (Pty) Ltd., 555 Voortrekker Road,
Maitland, Cape Town 7405, PO 181 Maitland, South Africa
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Year of manufacture The year and day of manufacture, in the format YYDDD, is
included in the first five digits of your product serial number,
(located on the product identification label).
These control panels have been designed in accordance with European EN 54-2,
and EN 54-4 standards. In addition, they comply with the following EN 54-2
optional requirements, see Table 1 below.
& - ! .
/ 0 "
- 1
2 ,
7.8 Output to fire alarm devices (output to C)
7.9.1 Output to fire alarm routing equipment (output to E)
7.11 Delays to outputs
7.12.2 Dependencies on more than one alarm signal (type B)
7.13 Alarm counter
8.3 Fault signals from points
8.4 8.4 Total loss of the power supply
8.9 8.9 Output to fault warning routing equipment (output to J)
9.5 9.5 Disablement of addressable points
10. Test conditions
10.1 General requirements
10.2 Indication of the test condition
10.3 Indication of zones in the test state
11 Standardized input/output interface