Ziton ZP3, Руководство по установке и обслуживанию

Страница: 91 / 163

Chapter 4: Software programming
ZP3 Fire Control Panel Installation, Commissioning, and Maintenance Manual 83
Ç ¶ µ ¥ ® ° × © · » ¨ ¥ ¶ µ ¥ ® °
Panel Number Each fire panel must be given a unique number 001 to 255 that is
embedded in the four-segment, IP-style address AAA-BBB-CCC-DDD,
where:
A = domain address
B = site address
C = host address
D = panel number
The domain address, site address and host address are fixed for a
particular site, i.e. for all panels in a Planner project.
The menu displays the following information:
Enter local panel number: When entering the Panel Number menu the
cursor defaults to the local panel number field. The IP address is
entered in the same style as the date, with digits added continuously
from left to right.
Address: The four-segment, IP-style panel address currently allocated is
displayed in this field.
New: The panel number selected in “Enter local panel number” is
displayed.
Note: When enter is pressed to save the data, if any of the three-digit
fields exceeds 255, an error message is displayed in the bottom right of
the menu. The error message is cleared once a value less than or equal
to 255 is entered. Press Esc to cancel any changes.
Day/Night Times Day/Night panels change to night mode each evening at a preset time.
This menu sets the changeover times for each day of the week.
D/delay Override Allows call points to be excluded from the “Day delay” alarm delay
period.
Panel Standard Allows panel to be configured to a specific standard:
EN 54, 1997 (Classic/UK)
EN 54, 2005 (Sweden etc.)
CP10, Singapore
The Control Key Levels menu path is: Setup > System Configuration > Control
Key Levels. The Control Key Levels menu sets the access levels for the following
functions (see Table 26).
Ê ³ Õ ´ © É ¸ ¬ ¤ § ° » µ ¥ ® ° ³ » » © · · ´ © Þ © ´ ® ¶ µ ¥ ® ° ·
Ç ¶ µ ¥ ® ° × © · » ¨ ¥ ¶ µ ¥ ® °
Sound Alarms Defines the required access level for the Sound Alarms control key (i.e.
the Sound Alarms button).
Silence Alarms Defines the required access level for the Silence Alarms control key.
Accept Defines the required access level for the Accept/Silence Buzzer control
key.
Reset Defines the required access level for the Reset control key.