Ziton ZP3, Руководство по установке и обслуживанию

Страница: 96 / 163

Chapter 4: Software programming
88 ZP3 Fire Control Panel Installation, Commissioning, and Maintenance Manual
Ê ³ Õ ´ © ¿ ¿ ¬ Ã © Þ © ´ ª Ç ¶ © ¨ ³ µ ¥ ® ° · ® ¶ µ ¥ ® ° ·
Ç ¶ µ ¥ ® ° × © · » ¨ ¥ ¶ µ ¥ ® °
Security Codes Defines panel access codes as follows:
1. Operator
2. Maintenance
3. Setup
4. Level 4
In addition, the access system allows you to enter up to 20 (optional)
operator names. Each name can have a different four-digit numeric
access code, and can have an access level from 1 through 4.
Clear: This menu lets you delete all the access codes. The existing
level 4 code is required for deletion and a new level 4 code is required.
Edit/View: This menu allows for viewing, adding, and deleting codes.
The first operator, code, and access level is displayed. Scroll to display
other entries. Displayed entries can be deleted. To add an entry, scroll
to the end of the list and enter the required details.
Print: This option generates a printed record of all existing operator
names, codes, and levels.
Local Programming Defines the programming method, as follows:
Local programming enabled = The panel can be programmed directly
from the keypad (with level 3 access), or by loading a project from a PC.
Local programming disabled = The panel cannot be programmed via the
keypad, it can only be programmed by loading a project created on an
external PC.
Erase Program Deletes all user programming and restores all configuration settings to
the factory defaults.
Software Upgrade Lets you load new operating software into the panel from a PC.
Loading new software does not lose or affect configuration
programming.
Debug Comms View data received on Z-Port 1 and 2 or other diagnostic information on
other virtual ports.
Panel Hardware Defines the hardware configuration, i.e. loops, zones, and power
options.
Clr Alrm Counters Resets the alarm counters to zero.
Language The ZP3 panel has facilities for two languages, English and one extra
language. This menu defines the default language that the panel uses.
An alternative foreign language can be loaded (for software version 3.02
and higher). This option was not available on version 3.00. Note that the
appropriate version language file must be used.
Refer also to the ZP3 language loading procedure, which may be found
in the
é å ê ä ä ç ë ì í ç ë î ï æ ð ç
(P/N 503-1436ZE-U-05)