Ziton ZP3, Руководство по установке и обслуживанию

Страница: 87 / 163

Chapter 4: Software programming
ZP3 Fire Control Panel Installation, Commissioning, and Maintenance Manual 79
Ê ³ Õ ´ © Ó È ¬ Ò ° º ¥ Þ ¥ º § ³ ´ ¶ ® ¥ ° µ · © µ µ ¥ ° ¦ · Þ ¥ © ß ® ¶ µ ¥ ® ° ·
Ç ¶ µ ¥ ® ° × © · » ¨ ¥ ¶ µ ¥ ® °
Sensitivity/AVF View the sensitivity to which a sensor is set. The following options are
available after accessing this menu.
Sensitivity point. Sensitivity settings for an individual point. Enter the
point address. The device type, zone, and sensitivity settings are
displayed. Use the scroll feature to view the next or previous point.
Sensitivity point range. Sensitivity settings viewed on a group basis by
zone and device type. Enter the zone range (or all), and the device
types (or all) and then use the scroll feature to view.
AVF point. Alarm verification settings for an individual point. Enter the
point address. The device type, zone, and AVF setting are displayed.
Use the scroll feature to view the next or previous point.
AVF point range. Alarm verification settings viewed on a group basis by
zone and device type. Enter the zone range (or all) and device type (or
all) and then use the scroll feature to view.
Zones View the point addresses of all devices allocated to a zone. Enter the
zone number to be viewed. The zone number and first point address in
that zone are displayed. Use the scroll feature to view the next or
previous address in that zone.
Messages View the identification message assigned to each point address. Enter
the point address. The message is displayed. Use the scroll feature to
view the next or previous point address.
Sounder View which sensors are fitted with sounder bases. The address of the
first sensor with sounder base is displayed together with the total
number of sensor-sounder base points. Use the scroll feature to view
the list.
Detector Test View which sensors have their self-test feature enabled. Enter the point
address for the point to be viewed. Use the scroll feature to view the
next or previous point.
Point Type View the type of device at each address. Enter the point address. The
device type is displayed. Use the scroll feature to view the next or
previous address.
AGV Allocation View which sensors are allocated into each alarm group. See the Points
> Individual Settings > Edit section for more details on AGV.
This Individual Settings > Edit menu lets the operator configure devices
connected to the Z-loops.
The menu path is: Points > Individual Settings > Edit. The available menu options
are described in Table 20.