Ziton ZP3, Руководство по установке и обслуживанию

Страница: 140 / 163

Appendix B: ZP3 system maintenance
132 ZP3 Fire Control Panel Installation, Commissioning, and Maintenance Manual
Two types of maintenance are performed on a ZP3 system:
• Routine maintenance
• Corrective maintenance
Routine maintenance must be performed at the prescribed times in order to help
the system operate to its optimum effect. The quarterly and annual services are
designed to check that the system is functioning to its installation specifications,
and must be carried out by an authorized Ziton maintenance company.
The panel operator or the company in-house maintenance staff typically carry out
a daily and weekly check. See the
2
ü 3
÷ Ì ó Î 4 ñ Ï Ð ó ñ Í
ü
Ú Ï Î Í ý Ë Î ó þ Û Ì Ü Î
(P/N 503-
1160ZE-U-12) if required.
Only trained personnel can perform corrective maintenance in order to bring the
system back into service after a particular fault.
A record of all alarms, events, checks, tests, and repairs must be entered in a
logbook (see P/N 503-1842ZE-1-02), which is typically maintained by the panel
operator.
Make sure that there is a record available showing how the fire system has been
configured. This is a system specification that should describe in detail all
aspects of the system. The system specification is essential for the system to be
tested and checked during servicing. This document is the blueprint of how the
system has been configured and how it should behave. When changes are made
to the system, the specification should be updated.
Quarterly maintenance is performed every three months. Refer to Table 40 for
the quarterly checks that must be carried out on the ZP3 system.
& " 5 6 7
8 " 6 7 1 (
1. Log book analysis Prepare for testing by reading through the log book. Any
corrective action that has not yet been taken should be noted
and carried out during the service.