Ziton ZP3, Руководство по установке и обслуживанию

Страница: 80 / 163

Chapter 4: Software programming
72 ZP3 Fire Control Panel Installation, Commissioning, and Maintenance Manual
1. Press the Menu button on the keypad.
The Main Menu is displayed, as shown below.
2. Choose Setup Menu to display the Setup menu.
To do this, press the 3 button on the keypad The system prompts you to enter
the access code.
3. Enter the setup (level 3) access code, and then press Enter.
The Setup menu is displayed, as shown below.
The menu name is displayed on the top line, and the menu items are shown with
numbers alongside. Menu items are selected by pressing the numeric keypad
button that matches the item number. Selecting a menu item may cause another
menu to appear or may carry out a particular function. The operator may be
prompted to enter the required information via the keypad.
Any menu can be cancelled and the previous menu presented by pressing the
Esc button. Esc is used to cancel or abort the current activity and return to the
previous activity.
Exit the menu system completely by pressing the Home button. This returns the
panel to its normal operation display. To prevent a system from being
inadvertently left in a menu, a timeout is built into the menu system. The timeout
counter starts from the last button press. In menu selection, the timeout is
approximately 45 seconds; if a software function has been started and not
completed, then it is 12 minutes.
The normal operation display consists of either the Home screen showing either
a title message plus the time and date (if the panel is in quiescent condition) OR
an alarm condition.
Some of the menus are used to set up the configuration of devices or functions.
Figure 52 shows some example displays, using the communications port setting
parameters.