Graphical Digital Panel Meter WPMZ-3 INSTRUCTION MANUAL
84
IM-0883-01
CompleteOutput
You can set output that is output when finished comparing waveform.
This output is ON when finished comparing waveform, and is reset when next comparing waveform start.
Operation:[MENU]
⇒
[Input]
⇒
[WaveCompareA/B]
⇒
[CompareOutput]
Setting: None (Initial state), AL1, AL2, AL3, AL4
WaveSelect
Select screen displayed in measure screen.
Operation:[MENU]
⇒
[Display]
⇒
[DispSelect]
⇒
[WaveSelect]
Setting:
WaveCompareA
ON (Initial state), OFF
WaveCompareB
ON (Initial state), OFF
Overwrite
Select overwrite enable/disable.
Operation:[MENU]
⇒
[System]
⇒
[WaveLog]
⇒
[Overwrite]
Setting: Enable (Initial state), Disable
OK/NG Wave A/B View
You can check 8 waveforms log (4 OK logs and 4 NG logs).
Operation:[MENU]
⇒
[Diag/Log]
⇒
[OK/NG Wave A/B View]
OK No.1
OK No.2
OK No.3
OK No.4
NG No.1
NG No.2
NG No.3
NG No.4
OK/NG Wave A/B Erase
You can erase all OK waveforms log of Ach or Bch.
You can erase all NG waveforms log of Ach or Bch.
Operation:[MENU]
⇒
[Diag/Log]
⇒
[OK/NG Wave A/B Erase]
