Graphical Digital Panel Meter WPMZ-3 INSTRUCTION MANUAL
47
IM-0883-01
BCD output
*In products that have no BCD output option, this setting item is invisible.
PatternSelect
You can store and set up 8 patterns (8 kinds) of various settings such as input and output with this unit, you can
select the pattern to save the setting in "PatternSelect".
Operation:[MENU]
⇒
[Output]
⇒
[BCDOutput]
⇒
[PatternSelect]
Setting value:Pattern1, Pattern 2,
・・・・・
Pattern 8
* At the time of opening the menu, the setting pattern is the value selected as operating on the measurement
screen.
* Since the setting pattern is common in each setting, "PatternSelect" such as input setting is also changed when
"PatternSelect" is changed by "BCD output”.
OutputDispValue
Select reference source of analog output.
*In 1ch products, [Bch] and [Calc] are invisible.
Operation:[MENU]
⇒
[Output]
⇒
[BCDOutput]
⇒
[OutputDispValue]
Setting value: None(Default), Ach, Bch, Calc
DataSignalLogic
Select output logic of BCD output data.
Operation:[MENU]
⇒
[Output]
⇒
[BCDOutput]
⇒
[DataSignalLogic]
Setting value: Negative(Default), Positive
SynSignalLogic
Select output logic of BCD output synchronized signal.
Operation:[MENU]
⇒
[Output]
⇒
[BCDOutput]
⇒
[DataSignalLogic]
Setting value: Negative(Default), Positive
*When acquiring data of BCD, when the synchronous signal (PC signal) is negative logic, please do it when the
transistor is OFF (rising edge or 1 level of the synchronous signal). In the case of positive logic, please do it when
the transistor is ON (falling edge of synchronous signal is 0 level).
* Since it is described based on the NPN open collector output, the output level is reversed in case of PNP output.
