Graphical Digital Panel Meter WPMZ-3 INSTRUCTION MANUAL
79
IM-0883-01
How to create of reference waveform is shown below.
・
CreateCompWave
Create comparison waveform based on reference waveform.
Set up/down shift (UD Shift) and left/right shift (LR Shift), check comparison wave.
The white line in the figure below is the reference waveform and the green lines are the comparison waveform.
UD Shift
0
～
99999[digit] (The decimal point position is reflected in the setting.)
LR Shift
0
～
99[points]
*The horizontal axis corresponds to 100 points per scale.
*When the automatic scaling function is ON, it is automatically adjusted so that ± 10% of the judgment
waveform becomes full scale. (The automatic scaling function is on by default.)
Execute
External control
[WaveCompA]
When the start condition is satisfied.
Measure 1500
points of data
③
④
Disp key
Enter key
Create a RefWave with these waves
Continue measuring data(→③)
※Base wave can be created with less waves than that declared.
⑤
Discard the current data and
proceed to ⑤
External control
[WaveCompA]
[WaveCompA]
Discard all of data
and back to ①
Check
Disp key
LR Shift
UD Shift
100 points/scale×15 scale = 1500points
Up
p
er
a
nd
l
o
w
er
lim
it
s
of
C
o
m
pW
av
e
F
ul
l s
ca
le
10%
10%
