Graphical Digital Panel Meter WPMZ-3 INSTRUCTION MANUAL
102
IM-0883-01
PatternSelect
You can store and set up 8 patterns (8 kinds) of various settings such as input and output with this unit, you can
select the pattern to save the setting in "PatternSelect".
* Actual pattern switching is done by "Pattern switching of external control function" or "Assign pattern
switching of external control function to shortcut key".
Operation:[MENU]
⇒
[Display]
⇒
[MultiA/B Base]
⇒
[PatternSelect]
Setting value:Pattern1, Pattern 2,
・・・・・
Pattern 8
* At the time of opening the menu, the setting pattern is the value selected as operating on the measurement
screen.
* Since the setting pattern is common in each setting, "PatternSelect" in other setting hierarchy is also changed
when "PatternSelect" is changed by this item.
SectionSwitch
Select a way of section switching.
Operation:[MENU]
⇒
[Input]
⇒
[MultiA/B]
⇒
[SectionSwitch]
Settings: LevelMethod (Initial state), EdgeMethod, EdgeTimer, AutoTimer
SectionTimerS1/S2/S3/S4
Set timer of each sections.
*This setting is enable if “SectionSwitch” is “EdgeTimer” or “AutoTimer”.
Operation:[MENU]
⇒
[Input]
⇒
[MultiA/B]
⇒
[SectionTimerS1/S2/S3/S4]
Setting value: 0.00
～
99.99[sec] (Initial stat is 1.00[sec])
CompletionSignalOutput
Select alarm that alarm when all sections finished. The alarm continues until next measurement starting.
*Alarm will be ON regardless of result of comparison judgement.
Operation:[MENU]
⇒
[Input]
⇒
[MultiA/B]
⇒
[CompletionSignelOutput]
Setting: None (Initial state), AL1, AL2, AL3, AL4
AlarmColorS1～S4
Select background colors that indicate alarm ON of each sections.
*You can set not color of number but color of background.
Operation:[MENU]
⇒
[Input]
⇒
[MultiA/B]
⇒
[AlarmColorS1/S2/S3/S4]
Setting: Black (Initial state), Red, Yellow, Green
*If the setting is “Black”, background color of alarming is same as of not alarming.
