Graphical Digital Panel Meter WPMZ-3 INSTRUCTION MANUAL
35
IM-0883-01
ExpressionCoef
Select [C] and [K] used for calculation.
Operation:[MENU]
⇒
[Input]
⇒
[2CalcInput]
⇒
[ExpressionCoef]
Setting value: C: ±9.9999 *10
±5
(Default is 0)
K: ±9.9999 (Default is 1)
DecPoint
Select decimal point position of display value.
Operation:[MENU]
⇒
[Input]
⇒
[2CalcInput]
⇒
[DecPoint]
Setting value:##### (Default),####.#,###.##,##.###,#.####
DispUnit
Select a unit for display value.
Operation:[MENU]
⇒
[Input]
⇒
[2CalcInput]
⇒
[DispUnit]
Setting value:μm,mm,cm,m,inch,g,kg,t,N,kN,MN,mN
･
m,N
･
m,kN
･
m,Pa,kPa,MPa,hPa,
kg/m2,N/m2,CustomUnit
ANALOG OUTPUT
*In products that have no analog output option, this setting item is invisible.
Setting of analog output is proceed as follow.
Each setting items are set up at [Setting]
⇒
[Input]
⇒
[AnalogOutput]
Descriptions of each setting item are described on the following pages after this section.
Moreover, please check "output detailed setting" for the setting not described in the above flow.
* Each setting and calibration value are saved and reflected at the timing when the menu is closed and
returned to
the measurement screen.
Note that the contents will not be saved if the power is turned off before closing the menu.
*If you select “CustomUnit”, you can create an original
unit within 6 letters. You can use following letters to
create a unit. ([a]
～
[z], [A]
～
[Z],
[,],(,),
1
,
2
,
3
,
1
,
2
,
3
,
-
,μ,Ω,g,
･
,/,ℓ,%,%
0
,°,’,” )
Pattern select
Select output range
Select reference source
Select output scale
