Graphical Digital Panel Meter WPMZ-3 INSTRUCTION MANUAL
34
IM-0883-01
PatternSelect
You can store and set up 8 patterns (8 kinds) of various settings such as input and output with this unit, you can
select the pattern to save the setting in "PatternSelect".
The pattern number being set is displayed as "P5" on the upper right of the setting screen as shown below.
Operation:[MENU]
⇒
[Input]
⇒
[2CalcInput]
⇒
[PatternSelect]
Setting value:Pattern1,Pattern 2,
・・・・・
Pattern 8
* At the time of opening the menu, the setting pattern is the value selected as operating on the measurement
screen.
* Since the setting pattern is common in each setting, "PatternSelect" such as output setting is also changed
when "PatternSelect" is changed by "2CalcInput”.
Expression
Select arithmeric expression for 2 input signals.
Operation:[MENU]
⇒
[Input]
⇒
[2CalcInput]
⇒
[Expression]
Functions
Arithmeric expression
None(Default)
---
Add
｛
( A + B ) + C
｝
* K
Sub
｛
( B – A ) + C
｝
* K
Mul
｛
( A * B ) + C
｝
* K
Div
｛
( B / A ) + C
｝
* K
Ave
｛
[ ( A + B ) / 2 ] + C
｝
* K
HiSelect
[ ( Larger of A and B ) + C ] * K
LoSelect
[ ( Smaller of A and B ) + C ] * K
DifAbs
[ (Abs of ( B - A )) + C ] * K
ErrRaito
[ ( A / B ) - 1 ] * K
Dens
[ B / ( A + B ) ] * K
Add
( A + B ) * K + C
Sub
( B – A ) * K + C
Mul
( A * B ) * K + C
Div
( B / A ) * K + C
*[A] means value of Ach, and [B] means value of Bch. The most detailed value is used for calculation.
(If display value is 123.45, calculation is done with 123.456789 that is the most detail internal data.)
*[C] and [K] means any number. (Set in “ExpressionCoef”)
* Please note the relation between A and B in the calculation formula in Sub, Div, ErrRaito and Dens.
