Graphical Digital Panel Meter WPMZ-3 INSTRUCTION MANUAL
66
IM-0883-01
14.
SYSTEM SETTINGS
This section explains the items of the system setting.
General
Brightness
Set screen brightness.
Operation:[MENU]
⇒
[System]
⇒
[General]
⇒
[Brightness]
Setting value:
5 Bright(Initial state), 4, 3, 2, 1 (Dark), 0 (Off)
*When the setting is 0(Off), screen lighting up only when you push MENU key or FUNC key.
PowerOnDelay
Set time until to start measuring after power on.
*While wairting for measurement start, screen shows [-----] and each outputs turn OFF.
Operation:[MENU]
⇒
[System]
⇒
[General]
⇒
[PowerOnDelay]
Setting value:
None (Initial state), 2Sec, 5Sec, 10Sec, 20Sec, 30Sec, 60Sec
PowerSavingTime
Set the time to turn off the screen when there is no operation for a certain period of time.
*Screen turns ON when some key is operated.
Operation:[MENU]
⇒
[System]
⇒
[General]
⇒
[PowerSavingTime]
Setting value:
None (Initial state), 1min, 2min, 5min, 10min, 30min, 60min
MeasureMode
Select measure mode(Default/MultiHold/WaveCompare).
Operation:[MENU]
⇒
[System]
⇒
[General]
⇒
[MeasureMode]
Setting:
Default (Initial state), Multi, WaveCompare
D-ZeroRetention
This function continuous D-Zero function even when re-power on.
(D-Zero function is reset at re-power on as default.)
Operation:[MENU]
⇒
[System]
⇒
[General]
⇒
[D-ZeroRetention]
Setting:
Disable (Initial state), Enable
Language
Select menu language.
Operation:[MENU]
⇒
[System]
⇒
[General]
⇒
[Language]
Setting:
English (Initial state),
日本語
(Japanese)
