Vanderbilt SPCK620, Руководство по установке и настройке

Страница: 13 / 368

Security 2
General safety instructions
13
Vanderbilt Installation & Configuration Manual A6V10276959
01.05.2016
2.2.3 Setup
Radio interference with other devices in the environment / EMS

When handling modules that are susceptible to electrostatic discharge, please
observe the ESD guidelines.
Damage due to unsuitable mounting location

The environmental conditions recommended by the manufacturer must be
observed.
See Technical Data.

Do not operate the device close to sources of powerful electromagnetic
radiation.
Danger of electrical shock due to incorrect connection

Connect the device only to power sources with the specified voltage. Voltage
supply requirements can be found on the rating label of the device.

Ensure that the device is permanently connected to the electricity supply; a
readily accessible disconnect device must be provided.

Ensure that the circuit that the device is connected to is protected with a 16 A
(max.) fuse. Do not connect any devices from other systems to this fuse.

This device is designed to work with TN power systems. Do not connect the
device to any other power systems.

Electrical grounding must meet the customary local safety standards and
regulations.

Primary supply cables and secondary cables should be routed such that they
do not run in parallel or cross over or touch one anther inside the housing.

Telephone cables should be fed into the unit separately from other cables.
Risk of cable damage due to stress

Ensure that all outgoing cables and wires are sufficiently strain-relieved.
2.2.4 Operation
Dangerous situation due to false alarm

Make sure to notify all relevant parties and authorities providing assistance
before testing the system.

To avoid panic, always inform all those present before testing any alarm
devices.
2.2.5 Service and maintenance
Danger of electrical shock during maintenance

Maintenance work must only be carried out by trained specialists.

Always disconnect the power cable and other cables from the main power
supply before performing maintenance.
Danger of electrical shock while cleaning the device

Do not use liquid cleaners or sprays that contain alcohol, spirit or ammonia.