Vanderbilt SPCK620, Руководство по установке и настройке

Страница: 283 / 368

Engineer programming via the browser 17
Configuring Communications
283
Vanderbilt Installation & Configuration Manual A6V10276959
01.05.2016
ATP Sequence No. This field displays the sequence number of the
ATP in the ATS configuration. Number 1 is
primary, numbers 2 - 10 are backup
ATP Unique ID This ID uniquely identifies the ATP to the RCT
ATP Name Enter a name for the ATP
SPT Account Code Enter a number to uniquely identify the panel to
the RCT (1 - 999999)
ARC Connection
Number 1
Phone number 1
Number 2 Phone number 2
Modem Select Select the modem to be used.

Modem 1
 Modem 2
Test Calls
Test Call Mode (Non-active ATP)
Select the mode for sending test calls when the
ATP is in non-active mode. Default: 24 hours.

Test calls disabled
 Test call every 10 minutes

Test call every 1 hour
 Test call every 24 hours

Test call every 48 hours
 Test call every 7 days

Test call every 30 days.
Test Call Mode (Active ATP) Select the mode for sending test calls when the
ATP is an active ATP. Default: 24 hours.

Test calls disabled
 Test call every 10 minutes

Test call every 1 hour
 Test call every 24 hours

Test call every 48 hours
 Test call every 7 days

Test call every 30 days.
Time of first test call
Time of first test call after reset or ATS
initialization.
 Send Immediately (default)

or
 Select a half hour interval between 00:00 and
23:30
Event Protocol
Protocol
Protocol used in communication.

SIA

SIA Extended 1

SIA Extended 2
 Contact ID
Event Profile Select the Event Profile which defines how and
which events are transmitted on this ATS.
 Use ATS Setting

Default Event Profile
 Default Portal Event Profile

All events
 Custom Event Profile
ATP Faults
ATP Monitoring Fault
Select to generate an ATP fault if the ATP