Vanderbilt SPCK620 Скачать руководство пользователя страница 254

Страница: 254 / 368

Engineer programming via the browser
Configuration

254
Vanderbilt

Installation & Configuration Manual

A6V10276959

01.05.2016

Description

Enter a name for the exception (16 characters max).

Start Date/End Date Select the start and end date.
On Time/Off Time

Select the desired times for setting / unsetting or for triggers. Use time

guidelines for Automatic Setting/Unsetting of Areas (see page [➙ 254]), or for

Automatic Setting/Unsetting of other Panel Operations (see page [➙ 254]).

Calendars Assigned

Select the desired calendar(s) for effect.

NOTICE

Global exception days created remotely using the SPC Manager tool cannot be

deleted or removed.

17.9.6.2

Automatic setting/unsetting of areas

A calendar can be configured for area auto-sets or auto-unsets.
For any day of the week, a configuration can have a maximum of 4 set times and 4

unset times. Configured times use the 24 hour clock (hh:mm). If the hour is 24,

then minutes must be 00, such as midnight is 24:00. It is possible to define a set

time without an unset and vice-versa. Configured times trigger the area to either

set or unset (provided all conditions are satisfied). Times entered are not

considered as a duration of time, rather they are a point in time that said action

(set/unset) will occur. If the controller is powered up or reset, the set/unset status is

kept and subsequent set or unset times occur according to configuration.

17.9.6.3

Automatic setting/unsetting of other panel operations

Panel operations including triggers, enabling of users, zones, physical outputs can

be automatically set or unset using On/Off, True/False or Active/Inactive state

configurations.
On/Off, True/False or Active/Inactive states can be assigned to an output that

effectively turns on or off and can be configured for any day of the week. State

configurations have a maximum of 4 set times and 4 unset times. Configured times

use the 24 hour clock (hh:mm). If the hour is 24, then minutes must be 00, such as

midnight is 24:00. Each configuration consists of a pairing of settings for On/Off,

True/False, Active/Inactive states. Any one setting without a respective

corresponding setting is disregarded.

Содержание SPCK620

















































































































































































































































































































































































Результаты поиска

Содержание SPCK620

Отзывы:

Похожие инструкции для SPCK620

Бренды по названию

Популярные бренды

Vanderbilt SPCK620, Руководство по установке и настройке

Результаты поиска

Содержание SPCK620

Отзывы:

Похожие инструкции для SPCK620

Бренды по названию

Популярные бренды