Vanderbilt SPCK620, Руководство по установке и настройке

Страница: 243 / 368

Engineer programming via the browser 17
Configuration
243
Vanderbilt Installation & Configuration Manual A6V10276959
01.05.2016
Enable Early/Late to report any setting and unsetting which is not according to
schedule.
Setting/Unsetting
The following parameters (with the exception of the Interlock parameter) are only
relevant in the following cases:

A Calendar is selected (see Schedule [➙ 240]), or

Unset Duration is enabled (has a value greater than zero), or

Both of the above conditions are met.
Auto Set Warning Enter the number of minutes to display a
warning before Auto Setting. ( 0 - 30 )
Note that the panel sets either at the
scheduled time or at the time defined by the
Delay Unset parameter. The first warning is
displayed at the configured time before the
scheduled time. There are further warnings
starting at one minute before setting time.
Auto Set Cancel Enables the user to cancel Auto Setting by
entering a code in the keypad.
Auto Set Delay Enables a user to delay Auto Setting by
entering a code in the keypad.
Keyswitch Enables Auto Setting to be delayed using
Keyswitch Expander.
Delay Interval Enter the number of minutes by which to
delay Auto Set. (1 - 300 )
Delay Counter Enter the number of times that Auto Setting
can be delayed. (0 – 99: 0 = unlimited)
Delay Unset Enter the number of minutes by which to
delay an Unset. (0 = no delay)
Interlock Group Select an Interlock Group to assign to this
area. Interlocking only allows one area
within the group to be Unset at any time.
Typically used in ATM areas.
Unset Duration If area is Unset for longer than this it will Set
17.9.5.2.6