Vanderbilt SPCK620, Руководство по установке и настройке

Страница: 289 / 368

Engineer programming via the browser 17
Configuring Communications
289
Vanderbilt Installation & Configuration Manual A6V10276959
01.05.2016
3. Click Back to return to the Event Profiles screen.

The name of each exception displays in the Event Exceptions table at the
bottom of the screen. The table shows the settings for the fields Report
Event, Filter Exception, Event Code (SIA/CID) and Remap Exception for
the event.
1. Click the Edit icon to make changes or the Delete icon to remove an Event
Exception.
2. To apply the event profile to an area, select the area checkbox.
3. Click Save to save the event profile.
4. Click Back to view the profile in the Event Profiles table.
Identification
Name
Enter the name of the Event Exception.
Event ID Event ID of the event on the system. This is
display only.
Event Description Description of the event. This is display only.
Event Filter
Report Event
Check to report the event. This overrides the
reporting value set for the event Filter Group. For
example, if the Filter Group Intruder Alarms is set
to report, you can exclude the BA event or by
disabling this setting.
Filter Exception Enable Check to exclude a range of addresses, for
example Zone IDs, from the Report Event field
setting.
if (0 ≤
Zone ID ≤ 9999)
then Report Event/Don't Report Event
Enter a range of addresses to exclude from the
Report Event setting. For example, if you choose
to report the event type BA, you may choose not
to report
Zone ID 1 - 9 for that event.
Alternatively, if you choose not to report the event
type BA, you may choose to report
Zone ID 1- 9
for that event.
Event Format
SIA Event Code
Default SIA event code that is transmitted to
represent the event. This field is display only.
Contact ID Event Code / Qualifier Default Contact ID Event Code / Qualifier
transmitted to represent the event. This field is
display only.
Remap Exception Enable Check to remap the default SIA, CID code /
Qualifier and Event Address to customised
values, for example, to remap
Zone ID 1 - 9 to
Zone ID 101 - 109. When enabled, the fields
below display.
if (0 ≤ Zone ID ≤ 9999) Enter the range of addresses to remap for an
event, for example, if you want to remap Zone ID