Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 84

Страница: 84 / 427

GL-10x0 Administrator’s Guide

To change the print properties, press

PROPERTY

. The

TopAccessComposer Print Properties screen opens.

TopAccessComposer Print Properties Screen

Modify the print settings and press

10 Press

ANCEL

to return to the TopAccessComposer Login screen.

Creating and Using Department Codes

The Electronic Document Processing System uses counters to keep track

of the number of pages printed, copied, and scanned. It displays these

statistics as totals or by department.
Each department has a name and a corresponding five-digit code. With

the department code feature enabled, if you enter a department code

when using the printer drivers, the controller adds the number of printed

pages to the counter for that department. When no department codes

exist, the system assigns all prints, copies etc. to a default department

called UNDEFINED.
If the department code feature is enabled, the administrator may enable

department code enforcement from TopAccess. If the department code

feature is disabled, the department code enforcement option is

unavailable.
When enabled, this option requires all users to enter a valid department

code to print to the controller.

Note: There is no enforcement of department codes in Unix filters,

Linux filters, Macintosh PPD files, or raw print jobs.

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы:

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 84 / 427

Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы: