Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 388

Страница: 388 / 427

366

GL-10x0 Administrator’s Guide

Owner:

a name that identifies the person who initiated the job.

Number of Pages:

the total number of pages in the job.

Size:

the size of the file.

Time and Date:

the time and date the job was submitted.

Type of Job:

current, Private, Proof, etc.

Actions

The check mark column allows you to take action on multiple jobs at the

same time. Clicking the check-all button at the top of the column either

selects or deselects all jobs.
Administrators can delete jobs that are not currently printed, edit the

copy count of proof jobs, and release proof and scheduled jobs.
End users can delete jobs that are not currently printed, edit the copy

count of proof jobs, and release their own proof and scheduled jobs.

Fax Tab

Fax Tab

The Fax tab provides links to the fax jobs in the various queues. The list

displays jobs based on the job types you select.

Job Types

The fax job types are:

Current:

displays a list of the current jobs in the fax queue.

Delayed:

displays fax jobs that the controller sends at a later date

and time.

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы:

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 388 / 427

Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы: