manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 223 / 427

Поделиться
Скачать
Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 223

GL-10x0 Administrator’s Guide

201

Banner Media Type

Select the banner page paper source through the media type using the 

following options.

The paper size always has priority over the media type and the paper 

source.
If this option is not specified, the default value is used.
The command to specify that the banner page should print on a plain 

page is 

lp –o bmtype=Plain  <filename>

.

You can use all of the options shown above in conjunction with one 

another. For example, to print a document on A4 paper, corner stapling, 

and duplex the command is

lp –o a4 –o staple=1 –o duplex  <filename>

CUPS Printing

CUPS is the Common Unix Printing System. It provides a relatively simple 

way to access a printer through the Unix operating system or many of its 

variants.

Installation

You must copy the PPD file onto the local machine, then install the 

printer, and finally configure the PPD. Use CUPS via the browser to install 

and configure the printer.

Banner Page Media Type Selection via Paper Source

Option Value

Description

Plain

The paper source that contains 

plain paper

 is requested.

Transparency

The paper source that contains 

transparency slides 

is requested.

Tab

The paper source that contains 

tab paper 

is requested.

Thick1

The paper source that contains 

disk labels

 is requested.

Thick2

The paper source that contains 

letter labels

 is requested.

Cover

The paper source that contains 

cover paper

 is requested.

Insert

The paper source that contains 

insert paper

 is requested.

Special

The paper source that contains 

special paper

 is requested.

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Отзывы:

Нет отзывов