Toshiba e-STUDIO GL-1010 Скачать руководство пользователя страница 313

Страница: 313 / 427

GL-10x0 Administrator’s Guide

291

Click the

Administration

tab.

Click the

AMC

subtab.

Click the

View

link.

Select the date that you want the readings for by clicking the down

arrow on the

Reading Dates

pull-down list. Then select the date on the

list.
If there is only one reading on that date, the information is displayed

immediately. Information includes the device information, customer

information, billing information, and print counters.
If there were multiple readings taken on that date, a list of the

readings is displayed.

Select the reading you want to view and click the

View

button.

Click the

Export

button. The export file is created and a link to its

name is displayed.

Click the name of the export file to download the file.

When you are finished, click any other link or tab to close this page.

Viewing the AMC Log

You can view the AMC log to see what readings have been taken and other

details.
To view the AMC log:
1

Click the

Administration

tab.

Click the

AMC

subtab.

Click the

Logs

link.

The top of the page shows the current total readings. Below that,

select either the

Meter Reading

log or the

Daily Reading

log, or both.

The log information is displayed below.

When you finish viewing the log, click any other link or tab to close

this page.

Printing the AMC Log

You can print the AMC log.
To print the AMC log:
1

Click the

Administration

tab.

Содержание e-STUDIO GL-1010












































































































































































































































































































































































































































Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы:

Toshiba e-STUDIO GL-1010, Руководство администратора, Страница: 313 / 427

Результаты поиска

Содержание e-STUDIO GL-1010

Отзывы: